The Tramex Concrete Coatings Installer Tech Kit (CCTK) is a compact kit for instant, non-destructive, quantitative moisture content testing of concrete floors and ambient conditions. It is the ideal non-destructive test kit for monitoring the most crucial information at the time of coating application, helping ensure concrete is dry enough to apply coatings and ruling out dew point issues.

The Tramex CME5 moisture meter allows non-destructive quantitative testing of concrete using gravimetric testing as a baseline, and comparative testing per ASTM F2659. The Tramex Feedback Datalogger is used for testing, monitoring and time logging ambient relative humidity, temperature and dew point. The Tramex Contact Temperature Probe provides temperature readings of the floor surface.

Bluetooth connectivity to the Tramex Meters App allows visualization of readings and data reporting to mobile devices, GeoTagging of test results, creating, saving and sharing photos, reports and charts, and viewing the meter screen on a phone when extending to hard to reach places.

The kit comes with an extension handle in a Tramex Easy-travel case.

Features

• Instant, non-destructive, quantitative concrete moisture testing
• Concrete moisture content scale 0 to 6%
• Gypsum reference scale 0 to 10
• Comparative reference scale 0 to 100
• Comparative testing per ASTM F2659
• Ambient relative humidity, temperature, dew point and grains per pound monitoring and time logging
• Floor surface temperature readings via contact temperature probe
• Extension handle included
• Free accompanying Tramex Meters App with Bluetooth connectivity

Applications

• Checking concrete is dry enough for coating application
• Ruling out dew point issues at the time of application
• Concrete floor moisture testing and monitoring for coatings installers
• Ambient condition monitoring and time logging on site

Kit Contents

1. Concrete Moisture Encounter 5 (CME5)
2. Feedback Datalogger (DL-RHTA)
3. Free Tramex Meters App for Android and iOS (phone not included)
4. Contact temperature probe
5. Extension handle
6. Tramex Easy-travel case

Specifications

Concrete Moisture Encounter 5 (CME5) Measuring Range

Feedback Datalogger DL-RHTA

Relative humidity: range 0 to 100%RH; accuracy ±1.5%RH (0 to 80%RH) and ±2.0%RH (80 to 99%RH) at 77°F (25°C); resolution 0.1%; drift under 0.25%RH per year.

Temperature: range -4°F to 158°F (-20°C to 70°C); accuracy ±0.1°F (±0.1°C); PTFE film sensor protection; drift under 0.04°F (0.03°C) per year.

Contact temperature probe: units °F (°C); temperature range -20°F to +175°F (-30°C to +80°C); accuracy ±0.9°F from 14°F to 185°F (±0.5°C from -10°C to +85°C); resolution 0.1% over the complete range.

Kit Specification

Standards Referenced

• ASTM F2659 (comparative moisture testing of concrete)