Description
The IRT2DP is a handheld, dual laser, non-contact infrared thermometer and dew point detector with a tricolour light and audible indication as the reading approaches dew point temperature. It is used to measure and display ambient and surface temperature, relative humidity and dew point temperature.
Note: on the Tramex website this product is listed as only available in kits.
Features
- Rapid detection function
- Precise non-contact measurements
- Dual laser targeting
- 3 mode display: humidity, dew point temperature and ambient temperature
- Green, yellow and red LED light plus audible signal indicating proximity to dew point temperature
- Automatic data hold
- User selectable degrees C or degrees F
- Pre-set emissivity of 0.95
- Backlit LCD display
- Unique flat surface, modern housing design
Applications
- Detecting condensation and dew point risk on surfaces before coating or flooring installation
- Ambient and surface temperature and relative humidity measurement in building inspection
- Water damage restoration and quick check testing alongside Tramex moisture meters
Specifications
| Parameter | Value |
|---|---|
| Temperature range | -58°F to 716°F (-50°C to 380°C) |
| Display resolution | 0.1 |
| Emissivity | Fixed at 0.95 |
| Temperature accuracy | -58°F to 32°F (-50°C to 20°C): ±3.5°C; 32°F to 716°F (20°C to 380°C): ±1.5°C |
| Wavelength range | 8 to 14 microns |
| Humidity range | 0 to 100% RH |
| Humidity accuracy | ±3.5% (20% to 80% RH) |
| Dew point temperature range | -22°F to 212°F (-30°C to 100°C) |
| Distance to spot ratio | 20:1 |
| Operating temperature | 32°F to 122°F (0°C to 50°C) |
| Storage temperature | -4°F to 140°F (-10°C to 60°C) |
| Relative humidity | 10% to 90% RH operating, less than 80% RH storage |
| Power supply | 9V battery, NEDA 1604A or IEC 6LR61 or equivalent |
Standards Referenced
No specific test standards are referenced on this product page.
Reviews
There are no reviews yet.